LINGLING EYH animal feed 2d two dimensional motive mixer blender

The 2d blending machine is made of stainless steel.During operation, under the dual action of the rotating mechanism and the swinging mechanism, the loading barrel rotates while also undergoing swinging motion, allowing the materials inside the barrel to be fully mixed.

The 2D Blender Machine consists mainly of three parts: the drum, the swinging rack, and the frame. The drum is placed inside the swinging rack. It's supported by four wheels and kept in proper axial alignment with the help of two round blocks. Out of the four support rollers, two of them can make the drum rotate when powered by the rotating power system. The swinging rack is driven by a set of crankshaft swinging rods. These rods are attached to the frame, and the swinging rack rests on the frame via bearing components. This setup allows the swinging rack to move in a particular way to achieve effective mixing.

None

Model	Total Volume（L）	Loading Volume（L）	Loading Weight（g）	Overall Size（mm）						Motor Power(kw)
Model	Total Volume（L）	Loading Volume（L）	Loading Weight（g）	A	B	C	D	M	H	Rotation	Swing
EYH-100	100	50	30	860	900	200	400	1000	1500	1.1	0.75
EYH-300	300	150	75	1000	1100	200	580	1400	1650	1.1	0.75
EYH-600	600	300	150	1300	1250	240	720	1800	1850	1.5	1.1
EYH-800	800	400	200	1400	1350	240	810	1970	2100	1.5	1.1
EYH-1000	1000	500	350	1500	1390	240	850	2040	2180	2.2	1.5
EYH-1500	1500	750	550	1800	1550	240	980	2340	2280	3	1.5
EYH-2000	2000	1000	750	2000	1670	240	1100	2540	2440	3	2.2
EYH-2500	2500	1250	950	2200	1850	240	1160	2760	2600	4	2.2
EYH-3000	3000	1500	1100	2400	1910	280	1220	2960	2640	5.5	4
EYH-5000	5000	2500	1800	2700	2290	300	1440	3530	3000	7.5	5.5
EYH-10000	10000	5000	3000	3200	2700	360	1800	4240	4000	15	11
EYH-12000	12000	6000	4000	3400	2800	360	1910	4860	4200	15	11
EYH-15000	15000	7500	5000	3500	3000	360	2100	5000	4400	18.5	15

LL 2D Blender Machine