Pharmaceutical Wet mixing Granulator

(1)Stainless steel Pharmaceutical Wet mixing Granulator The new type of pharmaceutical machinery, the Rapid Mixing Granulator Series, was created based on the YK Granulator. It can quickly combine and mix dry powder with glue.

then separate the mixture into smaller pieces. It complies with the GMP Standard.

(2) The Pharmaceutical Wet mixing Granulator is extensively utilized in the pharmaceutical, chemical, food, powder metallurgy, cosmetic, and drying products industries, among others.

When the proper conditions are satisfied, such as the timing and rate of mixing and granulating, the amount of glue used, the amount of energy used, etc., it may be produced repeatedly; 

The Pharmaceutical Rapid mixing Granulator Machine can produce with high efficiency for about ten minutes, and the produced particles can be properly compressed; 

The fluidized dryer and one-step fluidized granulator are both applications with broad applicability; 

reducing the drying time and saving 20–25% of the glue; 

Features: cutting-edge design, logical arrangement, dependable seal, practical operation, security, and dependability 

The mixing barrel is mounted to the frame and is made of solid, long-lasting, stainless SUS304 high-grade steel with a conical tip. 

A pneumatic valve for discharge is located on the side of the mixing barrel. 

The entire valve is attached by a gemel, making it simple to lift away for thorough cleaning and inspection. 

Other features include no dead angle, even mixing, and easy cleaning.

Between the mixing barrel and the barrel lid, there is a silicon rubber airtight ring that keeps out pollutants. 

The expanded portions of two transmission shafts are also airtight.