Micro Fine Grinder

Air Classifier LINGING The primary machine, auxiliary machine, and electric control box make up a mill machine. It has the advantages of wind selection, not requiring a sieve or net, and producing processed material with an equal granularity. The machine is capable of grinding chemical products while the production process is ongoing. dietary supplements, medications, cosmetics, colors, resins, cotourants, grains, etc.

1.Mill Air Classifier Simple construction is simple to install and maintain.

2.The Air Classifier Mill uses cutting-edge, well-known brand electric and mechanical components.

3.Mill Air Classifier Dust may be collected in a dust collecting box, and there is no dust throughout production.

4.Mill Air Classifier There is no need for a screen since the speed of the machine may adjust the particle size, which ranges from 80 to 600 mesh.

5.Mill Air Classifier A water-cooling jacket surrounds the mill chamber and bearing to keep the machine cool.

By way of a screw conveyor, material is fed into the LMicro Fine Grinder, where it is quickly spinning blades shear and grind the material. The powder enters the classification chamber after passing the guiding ring. Both air force and centrifugal force operate on the powder while the classifying wheel rotates. While the particles whose diameters are smaller than the critical diameter enter the cyclone separator and dust-collecting box, those whose diameters are greater than the critical diameter (diameter of the classification particles) are thrown back into the mill chamber to be ground again because of their higher mass.

*The above specifications are provided for reference only. We can also design and manufacture different standard upon customer's request.